Guangzhou Strong Chemical Co., Ltd. -

Guangzhou Strong Chemical Co., Ltd.

Showing 1 - 10 of 18, total 2 pages [First] [Previous] [Next] [Last]

auto refinish-tone controller
Specification: 1L x 6 tins/ctn
Detail: Tone controller is the special additive for 1K metallic and pearl paint. PROCESS use£ºAfter adding M38, the particulate size of metallic powder will become coarse, the flip become deeper, flop become lighter Mix Rat...

sell car paint-binder
Specification: 1L x 6 tins/ctn
Detail: Binder is the special additive for 1K metal and pearl paint. PROCESS use:M37 can dilute 1K metallic and Pearl series paints and speed up the wind-dry of paint film and benefit the arrangement of metal and pearl powder ...

sell auto paint-matting agent
Specification: 4L x 4 tins/ctn, 1L x 6 tins/ctn
Detail: UN-500 can reduce the gloss of 2K solid paint. It is used on matt parts. PROCESS Mix Ratio(by volume) 1) 50% gross: 2K solid paint: 2 parts Hardener: 1 part Matting agent: 1 part Thinner: 10~30% 2) less than 10%...

sell car paint-dry accelerator
Specification: 0.5L x 20 tins/ctn
Detail: UN-125 is for two pack topcoat. It can accelerate the drying and curing. PROCESS Mix Ratio (by volume) Add 10 to 15 gram per liter Packaging 0.5L x 20 tins/ctn Shelf Life 5 years

auto refinish-fisheye preventer
Specification: 1L x 10 tins/ctn
Detail: UN-124 can remove the fish eye appearance in the paint film. It is suitable for 2K solid paint or 2K clearcoat. It can make the paint film smooth and sleek. PROCESS Mix Ratio(by volume) Add 3¡ë UN-124 into the mixed paints ...

car refinish--degreaser
Specification: 4L x 4tins/ctn, 1L x 10 tins/ctn
Detail: UN-802 can remove the oil stain on the surface which need to be sprayed in order to avoid defects in the paint film. PROCESS Mix Ratio(by volume) No need to mix use 1.Clean the surface with water, and dry the surf...

auto paint--retarder
Specification: 4L x 4tins/ctn, 1L x 10 tins/ctn
Detail: It is used to spray the basecoat at high humidity condition in order to avoid paint film blushing. PROCESS Mix Ratio(by volume) Standard or slow drying thinner: add 10% retarder Substrate£ºS series and M series ...

auto refinish-thinner sra
Specification: 1L x 10 tins/ctn
Detail: UN-800 is a powerful bending solvent for partial repair. It is used to dissolve the junctions between the new and old paint film and fuse them to get a perfect mending effect. PROCESS Mix Ratio(by volume) It can be app...

car refinish-thinner
Specification: 4L x 4 tins/ctn
Detail: UN-6001(Fast drying thinner) UN-6002(Standard thinner) UN-6003(Slow drying thinner) UN-6004(Nitryl thinner) It is produced specially for Unic series paint. Fast drying, standard, slow drying can be chosen in order to ma...

auto paint-hardener
Specification: 2L x 4 tins/ctn, 1L x 10 tins/ctn
Detail: UN-8101(Fast drying hardener) UN-8102(Standard hardener) UN-8103(Slow drying hardener) Our hardener are suitable for two pack stoving varnish and clearcoat. PROCESS Mix Ratio(by volume) 2K coating: 2 parts Har...


Showing 1 - 10 of 18, total 2 pages [First] [Previous] [Next] [Last]
1 2